BRIDGE MOLD SYSTEMS
Mold in the climbing formwork system; It is connected to the vertical braces of the console by means of tension hooks and can be moved by crane as a whole. It; It will allow you to save a great deal of time during construction. Thanks to the buttresses, it is suitable for angled concrete pouring suitable for your project.
Anchor shaft that will remain in the concrete in the first casting in the head formwork system; In the second casting, it is connected to the console and allows the mold to be carried. A safe working platform is prepared by placing wooden planks on the H20 wooden beam or 8×20 wooden timber, which are connected to the special brackets on the consoles. Thus, an economical and safe system is obtained.
concrete pressure; The belt is transferred to the permanent anchor, which was left in the concrete in the previous casting, by means of the buttress and console. It is a system that stands out in terms of cost and efficiency. Thanks to the multi-purpose support elements of the system and its modular design, it is best suited to any geometry and need.
Thanks to the high carrying capacity of the support elements that make up the system, and by making the best use of the anchor system, wide climbing platforms can be established.
Since a certain angle can be given to the platforms and formwork according to the concrete surface, slope or working conditions, it not only adapts to the application area but also provides much safer working conditions.