CUP-lock SHORING & SCAFFOLDING

CUP-lock is a birdcage type scaffolding for medium duty scaffolding and shoring requirements. Captive rotating cups secure the transoms and ledgers i.e. up to four components per nodefirmly by hammering. Vertical connections are made by means of spigots i.e. fixed spigots in access scaffolding, removable ones in shoring applicationsincorporating provisions for locking pins if required. System would also provide a firm basis for applications such as Drop‐Head Shoring System, Access Platforms, Ladder Towers, Mobile Platforms, and Spectator Tribunes etc.

KD 100 SHORING TOWER

Since KD100 System is free standing, high load bearing capacities are possible by varying the distances between the towers. The system is very simple and quick to assemble, put the jack screws under the frame and just start stacking the “H” items on top of each other, without any snap locks or cotter pins. System diagonals are available for extra rigidity, especially when the towers are prone to lateral loads such as high wind loads etc. System can easily be fixed together for crane handling by the diagonals and jack screw holders.

DEV SHORE

An innovated system for shoring, which is independent of the project type, cost effective for a very wide range of engineering applications, at all heights. Very few and compact parts makes it very easy to erect and transport. The DEV-Shore system can be used for; Single Prop, Deck-Tables, Shoring Towers at different configurations, Heavy Duty solutions for concentrated loads; 3-dimensional flexibility at shoring; Means: one system like a KIT for all types of shoring! instead of 4 to 5 different systems as usual, high versatility brings higher usability! The heaviest part of the system weighs less than 12 kg, so the assembling and handling of the system parts are possible without using the crane. The horizontal ledger is only necessary every 2 m’s since the section of the vertical legs are 60.3 mm tubes in special steel. This also means a free walking space is possible between the platform levels, providing fast and safe erection. Since the distance of the verticals could be directly adjusted according to load taken, = saving a lot of material, time and labor cost.

TMS SLAB DEX

The system allows with only few parts a wide range of different slab formwork systems, to adapt optimally to the construction site, e.g. for each construction project and any floor plan the most appropriate and economical method whether residential or large areas. The design of the entire system has been carried out so that up to 30 cm thick slabs can be formed with the standard parts in compliance with the deflections to DIN 18202 line 7. For this system the prop load is always less than 20 kN. For the beginning of the setting of the formwork in a corner and for the compensation ranges no additional support is required. The panels consists of special steel profiles with a 10 mm thick polypropylen plate, 60 x 120 panel <16 kg.

SLABFLEX PROPPING SYSTEMS

SLABFLEX is highly versatile with its capability to be designed for every floor plan and slab thickness. The system consists of very few items; KAUFMANN HT 20 Plus Timber Beams, Props, Forkheads and Tripods. Timber Beams are light, easy to handle, yet capable for extensive spans. TMS Props are available for various heights and load bearing capacities. The Forkheads provides the continuously variable adaptability, while safely holding one or two HT 20 Plus timber beams in place. Since the Tripods support the formwork system to be self standing during set-up and stripping, they reduce the labor required during erection and dismantling.

FLEX DECK TABLE FORMS

Flex Deck is a very versatile and flexible system with easy adaptability to changing slab requirements. Formwork facing is freely placed plywood, while primary and secondary girders are HT20 timber beams. Shoring system consist of TD-EN series adjustable props with special FlexDeck heads which will be connected to the main beams of the table with help of its wedge and can be dismantled with one hammer chop. For squeezed openings such as beams and parapets a tiltable head version is also available.

MKH 150 SHORING SYSTEM

The MKH System provides, fast stripping and relocating times especially for large area slabs, high load bearing capacities even at very high slabs, main structural items for safe access stair towers. Unlimited variations in table sizes, floor plans and load bearing capacities are possible with only a few system components. Assembly is quick and straight forward with easy to use snap locks. System can be crane handled for faster relocating.